Chimney Liner & Rebuild Cost in St. George - Camera Evidence Before Any Quote

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (877) 327-1971

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate
Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Chimney Liner & Rebuild Cost in St. George?

Chimney liner and rebuild work in St. George typically runs from about $1,600 to $9,500, with most homeowners landing between $2,400 and $5,800. A standard stainless flexible liner installation generally falls in the $2,400 to $4,200 range, while a partial firebox rebuild sits around $1,600 to $3,400 and a full chimney rebuild can reach $7,000 or more. The written estimate you receive after an inspection sets the final price, and that estimate is free.

We’re Glacier Chimney Sweep, and we do this work across St. George and the surrounding valley. What follows is a straight breakdown of what each part of a liner or rebuild job costs here in 2026, what pushes those numbers up, and where you can reasonably trim the bill without cutting into safety.

Key Takeaways

  • Most liner and rebuild jobs in St. George land between $2,400 and $5,800, with small tile-liner fixes near $1,600 and full rebuilds topping $7,000.
  • A stainless flexible liner is the most common replacement, priced $2,400 to $4,200 installed.
  • HeatShield ceramic resurfacing can restore a compromised flue for less than a full reline when conditions allow.
  • Desert temperature swings and older masonry are the two biggest drivers of rebuild cost here.
  • Estimates are free and pricing is set per job, so you know the number before any work starts.

Chimney Liner & Rebuild Cost Breakdown (2026)

Chimney work isn’t one price. It’s a set of line items, and a good estimate lists them out so you can see exactly what you’re paying for. Here’s how the ranges break down for St. George in 2026.

Work Item Typical Cost Range
Level 1 sweep and inspection (needed before any liner or rebuild) $150 – $290
Level 2 camera inspection $250 – $450
Stainless flexible liner installation (DuraFlex system) $2,400 – $4,200
HeatShield ceramic resurfacing (liner restoration) $1,800 – $3,100
Crown repair or crown replacement $500 – $1,400
Partial firebox rebuild (brick and mortar) $1,600 – $3,400
Full chimney rebuild (above roofline) $7,000 – $9,500+
Chimney cap and damper upgrade $250 – $700

What drives the total up or down most is the liner itself. A straight flue with good clearances takes a flexible liner without much trouble; an offset, a flue that’s been relined before, or a roofline that needs scaffolding to reach safely adds labor. On the rebuild side, the big variable is how much of the chimney has actually failed. Sometimes only the crown and a few courses of brick are gone and a repair fixes it. Sometimes the interior mortar is gone throughout and a rebuild is the honest call. We won’t quote you a rebuild if a repair gets you a safe, working chimney – and we won’t sell a repair that kicks the real problem down the road.

We install DuraFlex flexible liner systems, and because we keep them in inventory, a liner replacement can often be completed in the same visit rather than strung across two appointments waiting on parts. We also work with Gelco, Olympia Chimney, Famco, and Copperfield products – the same lines professional chimney contractors specify, not what you’d pull off a hardware store shelf.

What Affects Chimney Liner & Rebuild Pricing in St. George

Two chimneys of the same height can carry very different price tags. Here’s what moves the number, with an eye on how things actually go in this part of southern Utah.

  • Desert temperature swings. St. George sees hot summer days and cold winter nights, and that daily expansion and contraction works on masonry mortar year after year. Chimneys here tend to crack and spall at the crown and upper courses first, which is why crown repair shows up in so many estimates. The wider the swing, the faster mortar wears.
  • Age and construction of the chimney. Older masonry chimneys with clay tile liners are more likely to need a full stainless reline once the tiles crack. Newer homes with a factory-built fireplace may need a different, often simpler, liner setup. We check what’s actually there before quoting.
  • Liner type and length. A flexible stainless liner is priced partly by the foot and partly by the flue’s condition. Longer runs, offsets, and tight clearances all add labor. A HeatShield ceramic resurfacing can sometimes restore a damaged flue at a lower cost than a full reline, and when that’s a safe option, we’ll tell you.
  • Access and roof pitch. A steep roof, a chimney far from the ridge, or a tight lot all affect how the crew sets up safely. Access work is real work, and it’s priced accordingly.
  • Extent of the rebuild. A partial firebox rebuild and a full above-roofline rebuild are very different jobs. The deeper the failed brick and mortar runs, the more the price climbs.
  • Whether it’s caught early or late. A cracked crown addressed during a routine sweep is a modest repair. The same crack ignored for years can let water into the structure and turn into a rebuild. The inspection is the cheap part; waiting is the expensive part.

How to Save on Chimney Liner & Rebuild

You can’t make a chimney rebuild cheap, but you can keep a small problem from becoming a big bill. A few practical moves:

  • Get the sweep and inspection first. A Level 1 sweep and inspection is a fraction of the cost of any liner or rebuild work, and it tells you exactly what you’re dealing with. Skipping it and guessing at the problem is how people end up paying for work they didn’t need – or missing work they did.
  • Ask about HeatShield before assuming a full reline. If your flue is compromised but the structure is sound, ceramic resurfacing may restore it for less than a stainless liner. Ask directly whether your chimney qualifies. The honest answer might be no, but it’s worth asking.
  • Fix the crown before it becomes a rebuild. Crown repair is one of the least expensive items on the table. Left alone, a failing crown lets water into the masonry, and that’s when rebuild costs start.
  • Bundle the work you already need. A cap, damper, and crown repair done alongside a liner installation usually costs less than scheduling each separately later.
  • Get a written, itemized estimate. A clear line-by-line estimate lets you compare and spot padding. Our estimates are free, and the written number is the price – no surprises after the crew is on the roof.

If you’re weighing whether to repair or replace, a short conversation usually settles it. Call (877) 327-1971. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.

FAQs – Chimney Liner & Rebuild Cost

How much does a chimney liner cost in St. George?

A stainless flexible liner installation in St. George typically runs $2,400 to $4,200 installed, depending on flue length, condition, and access. HeatShield ceramic resurfacing, when the flue qualifies, usually comes in lower at roughly $1,800 to $3,100. Call (877) 327-1971 for a free estimate so you know which option fits your chimney.

How much does a chimney rebuild cost in St. George?

A partial firebox rebuild generally runs $1,600 to $3,400, while a full above-roofline rebuild can reach $7,000 to $9,500 or more. The wide range reflects how much masonry has actually failed – a crown and a few courses is a fraction of a full rebuild. An itemized estimate after inspection gives you the real number. Estimates are free; call (877) 327-1971.

Is it cheaper to repair or replace a chimney liner?

Repair is often cheaper when the flue structure is sound – HeatShield resurfacing at $1,800 to $3,100 can restore a compromised liner for less than a full stainless reline at $2,400 to $4,200. But if the clay tiles are badly cracked or the flue is unsafe, a full liner is the right call, and a repair that doesn’t hold costs more in the end. We’ll tell you honestly which one you need. Call (877) 327-1971.

Can you install a liner and do a rebuild the same day?

A stainless liner replacement can often be completed in a single visit when the parts are on hand, and we keep DuraFlex flexible liner systems in inventory so we’re not waiting on a special order. A full rebuild is a bigger job scheduled over more time. Call (877) 327-1971 for a free estimate and we’ll lay out the timeline.

Why is a chimney liner or rebuild more expensive than a sweep?

Because it’s a different category of work. A sweep and inspection typically costs $150 to $290, while a liner or rebuild involves materials, masonry, and often roof access, which is why those jobs run $1,600 to $9,500. A sweep is still the smart first step – it’s how we find out whether you need the bigger job at all. Call (877) 327-1971.

Chimney liner and rebuild work in St. George isn’t something to price by guesswork. The range is wide because every flue is different, and the only honest way to land on a number is to look at what’s actually there. Whether you need a liner, a rebuild, or just want to know where things stand, we can help. We also handle dryer vent cleaning, so both of your home’s highest fire-risk venting systems can be checked under one call. Our technicians have up to 12 years of experience, we work with professional-grade product lines, and if we find something during a sweep, we have the parts and skills to fix it rather than hand you a list and walk away. Call (877) 327-1971. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the written estimate sets the price.

Pricing reflects the St. George market as of 2026. Glacier Chimney Sweep offers free estimates – call (877) 327-1971.

Written by the team at Glacier Chimney Sweep.

What Our Customers Say

★★★★★ 4.9 from 7+ reviews

"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."

- Nathan Pruitt

"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."

- Heather Sullivan

"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."

- Shane Quinn
Need Chimney Cleaning help in St. George? Licensed & insured · free written estimates
Call (877) 327-1971

Request a Free Estimate

Tell us what's going on in St. George. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7