Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Sweep for St. George Homeowners
Creosote buildup is the problem a chimney sweep solves, and in St. George it builds faster than most homeowners expect. Long, hot summers followed by a sudden cold snap mean the fireplace sits unused for months, then works hard for a few weeks – and that pattern lays down glazed, sticky creosote that a brush alone won’t fully clear. Our technicians have up to 12 years of experience with exactly this cycle, and they inspect before they clean so you know what’s actually inside your flue. We book sweeps on a seasonal calendar, so call ahead of the burning season to secure your slot. Call (877) 327-1971. We answer 24/7.
Chimney Sweep Services
Chimney Sweep Services cover the full job: a camera inspection of the flue, a proper cleaning with the right brushes for your flue type, and a written report with photos of anything that needs attention. You need this when you’ve moved into an older home and don’t know the last time the flue was touched, when you’ve burned a full season without a sweep, or when you’re seeing smoke roll back into the room. Glacier Chimney Sweep handles the sweep and the repair in one visit, so a cracked crown or a failed damper doesn’t become a second appointment. A standard sweep in St. George typically runs $150-$280, and the written estimate you receive sets the final price.
What a Full Sweep Covers
We run a camera down the flue before and after cleaning, brush the flue with the correct rod and brush for the material, and clear the firebox and smoke shelf. The photo report shows you what we saw, so you can judge the condition yourself instead of taking our word for it.
Sweeps for First-Time Fireplace Owners
If this is your first fireplace, the sweep visit doubles as an orientation: what kind of flue you have, how to use the damper properly, and what wood to burn to limit creosote. We’d rather answer those questions now than have you learn them the hard way.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cleaning
Chimney Cleaning is the hands-on removal of soot, ash, and creosote from the flue, firebox, and smoke chamber – the part of the job that lowers your fire risk. It’s due once a year for most households, and sooner if you’ve burned unseasoned wood, noticed a strong campfire smell in the room, or seen black flakes falling into the firebox. Glacier Chimney Sweep cleans with drop cloths and a sealed vacuum so your living room looks the way it did when we arrived. Chimney cleaning in St. George usually lands between $130 and $260 depending on flue length and how much buildup has accumulated. The written estimate is what you pay.
Creosote Stages and What They Mean
Creosote moves from light soot to flaky crust to a glazed, tar-like layer that’s genuinely hard to remove. Light and flaky stages brush out cleanly. Glazed creosote may call for chemical treatment or resurfacing before the flue is safe to use again, and we’ll tell you which stage you’re in with photos to back it up.
Keeping the House Clean During a Sweep
We lay floor protection, seal the firebox opening, and use a vacuum rated for fine ash rather than a shop vac that just recirculates dust. Ash and soot go out with us. You shouldn’t have to clean up after a cleaning.
Fireplace Cleaning
Fireplace Cleaning goes beyond the flue to the firebox, glass doors, grate, and hearth – the surfaces you actually see and touch. It’s worth doing when the firebox is stained with soot, the glass is opaque with black film, or the hearth is gritty with ash that keeps getting tracked through the house. Glacier Chimney Sweep treats fireplace cleaning as part of the same visit as the sweep, so you’re not paying for a second trip. Fireplace cleaning in St. George typically runs $80-$175 as an add-on to a sweep, and the estimate you’re given in writing is the price.
Glass Doors and Firebox Surfaces
Black film on glass doors is normal with wood burning, but it dulls the fire and hides cracks in the glass. We clean the doors properly and check the gasket and latch while we’re there, since a failing seal lets smoke past the door instead of up the flue.
Ash Removal and Hearth Care
We clear the ash pan and firebox, and we leave a shallow ash bed behind because it helps coals burn. The hearth gets cleaned of grit and soot so it doesn’t become a source of indoor dust all season.
Chimney Services
Chimney Services at Glacier Chimney Sweep cover sweep, inspection, and repair under one roof – crown work, damper replacement, flashing repair, liner restoration, and relining. You need the repair side of the business when a sweep turns up a deficiency, which is common in St. George homes where the chimney faces hard sun on one side and monsoon rain on the other, and the crown cracks from the expansion. We carry DuraFlex flexible liner systems so a reline doesn’t have to wait on a special order. Chimney repair in St. George typically runs $300-$900 for crown and flashing work, with relining quoted separately. The written estimate sets the final price.
Repairs Found During a Sweep
Most deficiencies we find are small: a hairline crown crack, a rusted damper, a missing cap. Fixing them during the same visit costs far less than letting water intrude for another season. We fix what we find rather than handing you a deficiency list and walking away.
HeatShield and Liner Restoration
When a clay flue is cracked or spalling, HeatShield ceramic resurfacing can restore it as an alternative to a full reline – it fills voids and smooths the flue back to a workable surface. Not every flue qualifies, and we’ll tell you honestly which route yours needs.
Chimney Sweep Certified
Chimney Sweep Certified means the technician doing the work has been trained and tested on inspection and cleaning standards, not just handed a brush. It matters when you’re buying a house and the inspection report has to hold up, or when you want to know that the person on your roof understands flue dynamics and not just how to push a rod. Glacier Chimney Sweep technicians are experienced and trained to inspect to a documented standard, and every visit ends with a camera inspection and a photo report you can keep. A certified-level sweep with inspection in St. George runs about $180-$320. The written estimate is the final number.
What Certification Actually Requires
It means training in venting theory, combustion, and building codes, plus field experience under supervision before independent work. The point for you is judgment – knowing the difference between a flue that’s dirty and one that’s unsafe.
Why the Photo Report Matters
We photograph what the camera sees so you’re not relying on a verbal description. If a contractor tells you the flue needs thousands in work, a photo report is how you verify it. We’ll walk you through the images and tell you plainly when something can safely wait.
Gas Fireplace Cleaning
Gas Fireplace Cleaning addresses the parts of a gas appliance that wood sweeps never touch: the burner ports, logs, glass, and the venting that carries exhaust out. You need it when the flames have gone lazy and yellow instead of crisp blue, when the glass is filmed with white residue, or when the fireplace hasn’t been serviced since you moved in. Glacier Chimney Sweep cleans the burner assembly, clears blocked ports, and checks that the vent is drafting properly. Gas fireplace cleaning in St. George usually runs $120-$240. The written estimate sets the price.
Burner Ports and Flame Quality
Dust and lint plug burner ports over time, which changes the flame shape and can leave incomplete combustion behind. We clear the ports and check the flame pattern after cleaning. A lazy yellow flame is a sign the appliance needs attention, not just a cosmetic issue.
Venting Checks on Gas Units
A gas fireplace still needs a clear vent, and a blocked or disconnected vent can push exhaust into the room. We check the vent path and confirm draft. Carbon monoxide is odorless, so this is one check worth doing properly.
Chimney Maintenance
Chimney Maintenance is the annual routine that keeps a flue safe and catches small failures before they get expensive: a sweep, an inspection, a cap check, crown inspection, and a look at the flashing and masonry. It’s due once a year, ideally before the burning season starts, so any repair can be scheduled without rushing. Glacier Chimney Sweep handles maintenance on wood, gas, and pellet venting and can complete minor repairs during the same visit. An annual maintenance visit in St. George typically runs $150-$280, and repair work is quoted separately. What’s written on your estimate is what you pay – no surprises after the fact.
Building a Yearly Rhythm
Fireplaces that get swept on the same schedule every year last longer and fail less. We’ll note the flue type and condition on your report so next year’s visit picks up where this one left off. Consistency matters more than any single cleaning.
What to Watch Between Visits
Water stains on the ceiling near the chimney, a cap that’s gone missing, or mortar crumbling at the crown are all worth a call before the next scheduled sweep. Catching them early is the whole point of maintenance.
Brands We Service
We work with professional-tier product lines – the same ones chimney engineers specify, not what’s on the shelf at the hardware store. That includes Gelco and Olympia Chimney components for venting and caps, Famco for chimney and venting products, and Copperfield for liners and accessories. We know where each of these wears out and how to match a repair to the system you already have.
Whether you have Gelco, Olympia Chimney, Famco, or Copperfield equipment, or any other make, we can help. We also install and work with DuraFlex flexible liner systems and HeatShield ceramic resurfacing, so a repair doesn’t have to mean replacing everything. If you’re not sure what’s on your roof, the camera inspection will tell us both.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Strong campfire smell in the room. A draft issue or heavy creosote load will push that smell into the house even when the fireplace is off. It usually means the flue needs cleaning or the damper isn’t sealing.
- Smoke rolling back into the room. This is a draft failure, and it can come from a blocked flue, a cracked flue tile, or a chimney that’s too short for the roofline. Worth a look before your next fire.
- Black staining on the chimney exterior or ceiling. Staining means creosote or water is escaping where it shouldn’t. Both get worse with time and cost more to fix later.
- Visible cracks in the firebox or flue tiles. Cracks let heat and gases reach materials that aren’t rated for them. That’s a fire risk, and it’s not something to burn through another season.
- It’s been more than a year since the last sweep. If you can’t remember the last cleaning, that’s your answer. Annual sweeping is the baseline for wood-burning appliances.
Our Process, Step by Step
- 1
Book the visit and confirm the flue type. We ask about your appliance – wood, gas, pellet – and what you’ve noticed so far. That determines the tools and time we set aside. Call (877) 327-1971. We answer 24/7.
- 2
Protect the room. Drop cloths go down and the firebox gets sealed before any brush moves. The vacuum we use is rated for fine ash so soot doesn’t end up in your living room.
- 3
Camera inspection first. We run a camera down the flue before cleaning, which tells us the creosote stage, the flue material, and whether there are cracks or gaps. Cleaning without looking first is a guess.
- 4
Clean and re-inspect. We brush the flue with the correct tool for the material and clear the firebox and smoke shelf, then run the camera again to confirm the result. Any deficiency gets photographed.
- 5
Walk you through the findings. We show you the photos, explain what’s urgent and what can wait, and leave you with a written report and estimate. Nothing gets recommended without camera evidence you can see for yourself.
How Much Does Chimney Sweep Cost in St. George?
A typical chimney sweep in St. George runs $150-$280 depending on flue length, how much buildup is present, and whether you have a straightforward masonry flue or a more complex setup. Add fireplace cleaning and you’re usually in the $200-$350 range for the combined visit. If the camera finds a crown crack or a rusted damper, repair work is quoted separately, with crown and flashing repairs typically running $300-$900 and relining or HeatShield resurfacing quoted after we see the flue condition.
What affects the price most: the creosote stage (glazed creosote takes more work than soot), roof pitch and access, whether you have one flue or several in the same chimney stack, and whether repairs are done during the same visit. Consolidating the sweep and a minor repair into one appointment usually saves money over booking two trips.
How to avoid overpaying: ask for a written estimate before work begins, ask for the camera inspection photos, and ask specifically which findings are urgent versus which can wait a season. Any honest contractor will answer all three. If someone tells you the flue needs to be relined, the photo report is how you verify it – and we’ll tell you plainly when HeatShield resurfacing or a simple repair is the better call.
Every estimate we give is free, and the price is set per job by the written estimate, so there’s no surprise on the invoice. Call (877) 327-1971 for an exact quote.
Our Service Area Near St. George
We work across St. George and the surrounding communities, including Washington, Santa Clara, Ivins, Hurricane, La Verkin, Toquerville, Leeds, Dammeron Valley, and Veyo. Drive times vary with the canyon and highway traffic, so we schedule each area’s visits by route rather than promising a window we can’t hold. If you’re outside those towns, call and we’ll confirm coverage. For a nearby option, our chimney sweep page covers Washington in more detail.
Serving St. George, UT – Our Local Coverage Area
We serve St. George and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Sweep in St. George
A chimney sweep is the service that removes soot and creosote from your flue and firebox and inspects the chimney for defects. It’s cleaning plus a look at the flue, crown, cap, and damper, because creosote is the fuel source for chimney fires and cracks are how heat escapes. A sweep visit should end with a report, not just a clean firebox.
A standard residential sweep takes about 45 to 90 minutes, depending on buildup and how many flues your chimney has. If we find a repair that can be done during the visit, it adds time, and we’ll tell you before we start on it. The inspection and cleanup are part of that window, not extra.
Most sweeps in St. George cost $150-$280, with fireplace cleaning adding roughly $80-$175 and repair work quoted separately. The final price depends on flue length, creosote stage, and roof access. Call (877) 327-1971 for an exact quote – estimates are free.
Yes, we service Gelco and Olympia Chimney venting and components, along with Famco and Copperfield equipment, and we can match a repair to the system already on your roof. If we find a part that’s failing, we can often complete the repair during the same visit. Whatever make you have, we can help.
Same-day service is often possible when we have capacity on the route, though availability varies. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday – we’re closed Saturday. A call outside those dispatch hours gets booked into the next opening. Call (877) 327-1971 and we’ll book you in.
What we can tell you is that nothing is recommended without camera evidence you can see, and our repairs use professional-grade materials, including DuraFlex liners and HeatShield ceramic resurfacing. We stand behind the work we perform. Ask about the specifics when you book and we’ll explain what applies to your job.
Clear the area around the fireplace and move anything breakable off the hearth, and don’t light a fire for at least 24 hours before the visit. If you can, note the last time the chimney was cleaned and whether you burn wood, gas, or pellets. Have a way for us to reach the roof, and keep pets in another room during the visit.
Schedule Your Chimney Sweep Service in St. George Today
Call (877) 327-1971 to book your chimney sweep in St. George. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. You’ll get a camera inspection, a photo report, and a free no-obligation written estimate before any repair work begins. If you’d like to see our full service lineup, start with our Glacier Chimney Sweep page.
We also cover chimney sweep service in Santa Clara for neighbors just west of town. Our chimney sweep page goes deeper on local flue conditions. Dryer vent cleaning and chimney repair are booked the same way, so ask about either while you’re on the phone.
Written by the team at Glacier Chimney Sweep.